View AL07X11-35S_1775178.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

table of contents page no. amphe-lite* series - amphenol?s ultimate commercial subminiature connecto r . . . . . . . . . . 1 performance criteria, specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 insert availability and identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 alternate positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 insert arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 8 shell styles al00 wall mounting receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 al06 straight plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 al07 jam nut receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 accessories receptacle protection cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 plug protection cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 dummy receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 cable clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 contacts, sealing plugs, plastic dust caps . . . . . . . . . . . . . . . . . . . . . . . . . 16 contacts (printed circuit board, wire wrap) . . . . . . . . . . . . . . . . . . . . . . . . . 17 fiber optic termini . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 - 20 application tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 how to order amphe-lite connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 amphe-lite capabilities (fiber optics, coax co ntacts, flex term inations, pc tails) . . . . . . . . . 23 amphe-lite capabilities (non-magnetic, ground plane connectors, twinax & power contacts) . . . . 24 sales office listing please visit our website at www.amphenol-industrial.com also visit www.amphenol-aerospace.com. amphenol industrial operations and amphenol aerospace are both located at sidney, ny. together with other amphenol divisions worldwide, amphenol offers one of the broadest ranges of interconnect products in the marketplace. amphenol aerospace and amphenol industrial operations operate quality systems that are certified to iso-9001 and as-9100 by third party registrars. * amphe-lite is a registered trademark of amphenol corporation.
1 quick coupling thread coupling nut plug shell spring fingers (emi) anti-decoupling device ratchet amphe-lite shell styles wall mount receptacle straight plug jam nut receptacle commercial 38999, series iii type composite connectors the amphe-lite connector series is designed for communications equip- ment manufacturers with signal, power, rf or fiber optic interconnect requirements in harsh environments such as communication towers, out- door and roof-top applications. this commercial 38999, series iii type composite connector series is ideal for communications equipment, manu- facturing process control and medical equipment. the amphe-lite offers the highest performance capabilities for severe environment applications, and yet is cost effective enough for general duty and non-environmental applications. the amphe-lite is ul recognized, file e115497. rohs compliant product available - consult amphenol industrial operations. features and benefits of the amphe-lite series: service class f amphe-lite connectors provide excellent emi shield- ing and grounding through electroless nickel plating and spring ground- ing rings. environmental sealing is ensured with interfacial seals to prevent contact corrosion. composite shells are completely immune to corrosion problems. service class u provides a non-conductive shell when emi shielding is not a criteria. class f composite shells resist severe corrosion, and provide plating endurance from salt spray exposure for a minimum of 2000 hours. completely mates in one 360-degree turn of the coupling nut to provide the fastest and easiest equipment assembly and maintenance possi- ble. acme threads provide coupling durability. thicker wall sections and a greater coupling surface area improve strength and shock resistance. blunting of the thread on both the coupling nut and receptacle elimi- nates cross coupling. recessed pins minimize potential contact damage in this 100% scoop- proof connector. in a blind mating application, mating shells cannot ?scoop? the pins and cause a shorting or bending of contacts. a rigid dielectric insert with excellent electrical characteristics provides durable protection to the contacts. the socket contacts are probe proof, and all contacts are rear insertable and rear removable. available in sizes 10 power, 12, 16, 20 and 22d contacts are plated in the standard 50 micro inches minimum gold, with 100 micro inches as an option. optional features: conductive and non-conductive options are available. see pg. 22. amphe-lite connectors allow for use of many contact types: fiber optics, shielded coaxial, twinax ground plane versions, and power con- tacts. (see pages 23, 24). consult amphenol industrial for more infor- mation on combinations of different types of contacts in one connector shell - what amphenol calls their new ?combo-c? inserts. non-magnetic amphe-lite is a new variation - amphenol offers one of the few 100% non-magnetic connectors with high contact density avail- able today. see page 24. amphe-lite series amphenol?s ultimate commercial subminiature connector designed for performance numerous advantages in performance capability are designed into the amphenol ? amphe-lite connector. a positive shoulder to shoulder coupling design, grounding fingers, and electroless nickel plating pro- vide superior emi shielding capability of 65 db mini- mum at 10 ghz. r o h s a m p h e n o l e u / 2 0 0 2 / 9 5 / e c u l ?
2 140 120 100 80 60 40 20 0 100 200 300 400 500 600 700 800 typical shielding effectiveness test data emi shielding effectivess db testing by triaxial method shielding effectiveness amphe-lite connectors (nickel finish at ?55?c to +125 ?c) db frequency megahertz 140 120 100 80 60 40 20 0 123456 78910 typical shielding effectiveness test data emi shielding effectivess db testing by mode stirring method shielding effectiveness amphe-lite connectors (nickel finish at ?55?c to +125 ?c) db frequency gigahertz amphe-lite series performance criteria, specifications amphenol ? amphe-lite connectors provide emi shielding capability which exceeds mil-dtl- 38999 series iii requirements. the amphe-lite connector with emi grounding fingers and conductive finishes has proven to be the ultimate in emi shielding effectiveness. the charts at right illustrate shielding effectiveness data which is typical of connectors tested with the nickel finish over a wide frequency range. these capabilities along with a 125c tempera- ture rating and superior moisture sealing protec- tion provide the user with a connector that can withstand the most rigorous application. ul rti rating is 105c. * when using silver plated wire. ** please note that the establishment of electrical factors is left entirely in the designers hands, since he is in the best position to know what voltage, switching surges, transients, etc. can be expected in a particular circuit. contact rating contact size test current maximum millivolt drop crimp* crimp hermetic 22d 5 3 73 20 7.5 5 55 16 13 10 49 12 23 17 42 10 (power) 33 na 33 contact size crimp well data well diameter nominal well depth 22d .0345 .0010 .141 20 .047 .001 .209 16 .067 .001 .209 12 .100 .002 .209 10 (power) .137 .002 .355 service rating service rating suggested operating voltage (sea level) test voltage (sea level) ac (rms) dc m 400 550 1300 vrms n 300 450 1000 vrms i 600 850 1800 vrms ii 900 1250 2300 vrms finish data amphe-lite connectors are available in the following finishes: conductive electroless nickel plated composite (service class f) black composite, unplated (service class u) see how to order page 22. test data beyond 2ghz is subject to equipment variation.
3 shell size/arrg. service rating total contacts contact size 22d 20 16 12 12 (coax) 10 (power) 8 (coax) 8?? (twinax) 9-35 m 6 6 9-94 m 2 2 9-98 i 3 3 11-2 i2 2 11-5 i 5 5 11-35 m 13 13 11-98 i 6 6 11-99 i 7 7 13-4 i4 4 13-8 i 8 8 13-13 i, fiber optic 4 2* 2 13-35 m 22 22 13-98 i 10 10 15-5 ii 5 5 15-15 i 15 14 1 15-18 i 18 18 15-19 i 19 19 15-35 m 37 37 15-97 i 12 8 4 15-ac m 26 24 2 17-2 m 39 38 1 17-6 i 6 6 17-8 ii 8 8 17-22 na 4 2 2 17-26 i 26 26 17-31 m 19 4 11 4 17-35 m 55 55 17-99 i 23 21 2 19-11 ii 11 11 19-31 m 15 12 1 2 19-32 i 32 32 19-35 m 66 66 21-11 i11 11 21-16 ii 16 16 21-35 m 79 79 21-39 i 39 37 2 21-41 i 41 41 21-75 m4 (see note) 23-6 m6 6 23-21 ii 21 21 23-35 m 100 100 23-53 i 53 53 23-54 m 53 40 9 4 23-55 i 55 55 25-4 i 56 48 8 25-7 na 99 97 2 25-8 na 8 8 25-11 n 11 2 9 25-17 m 42 36 6 25-19 i19 19 25-20 n 30 10 13* 4 3 25-24 i24 1212 25-26 i 25 16 5 4 25-29 i29 29 25-35 m 128 128 25-37 i37 37 25-43 i 43 23 20 25-46 i 46 40 4 2? 25-61 i 61 61 ground plane proprietary option available. arrg. 9-5 is exclusively ground plane type. see page 24 for further information of ground plane connectors. * ti16ttdditdtfib ticltsidny ? for rg180/u and rg195/u cables only. (contact sidney, ny for other cable application). ?? size 8 coax and twinax are interchangeable. amphe-lite series insert availability and identification
4 master key/keyway position shell size key & keyway arrangement identification letter ar or ap bsc br or bp bsc cr or cp bsc dr or dp bsc 9 n a b c d e 105 102 80 35 64 91 140 132 118 140 155 131 215 248 230 205 234 197 265 320 312 275 304 240 11, 13, and 15 n a b c d e 95 113 90 53 119 51 141 156 145 156 146 141 208 182 195 220 176 184 236 292 252 255 298 242 17 and 19 n a b c d e 80 135 49 66 62 79 142 170 169 140 145 153 196 200 200 200 180 197 293 310 244 257 280 272 21, 23, and 25 n a b c d e 80 135 49 66 62 79 142 170 169 140 145 153 196 200 200 200 180 197 293 310 244 257 280 272 a plug with a given rotation letter will mate with a receptacle with the same rotation letter. the angles for a given connector are the same whether it contains pins or sockets. inserts are not rotated in conjunction with the master key/keyway. amphe-lite series alternate insert positioning main keyway ar bsc br bsc cr bsc dr bsc ? ? ? ? main keyway ap bsc ? bp bsc ? cp bsc ? dp bsc ? receptacle (front face shown) plug (front face shown)
5 5 1 6 4 3 2 ba c a b a b a b c d e 1 2 3 4 5 6 7 8 9 10 11 12 13 a b c d ef a b c d e f g a b c d a b c d e f g h 1 21 22 a b c d e f g h j k a b c d e a b c d e f g h j k l m n p r a b c d e f g h j k l mn p r s tu a b c d e f g h j k l m n p r s t u v 1 21 31 a b c d e f g h j k l m 1 6 11 17 30 a b c d e f a b c d e f g h 1 3 4 9 10 16 17 24 25 31 32 39 40 47 46 52 53 55 a b c d e f g h j k l m n p r s t u v w x y z a d c b a b c d e f g h j k l m n p r s t u v w x y z a b c a b c d f ront face of pin inserts illustrated amphe-lite series insert arrangements insert arrangement 9-35 9-94 9-98 11-2 11-5 11-35 11-98 11-99 13-4 service rating m m i i i m i i i number of contact 6 2 3 2 5 13 6 7 4 contact size 22d 20 20 16 20 22d 20 20 16 insert arrangement 13-8 13-13 13-35 13-98 15-5 15-15 15-18 service rating i i, fiber optic m i ii i i number of contacts 8 2 2 22 10 5 14 1 18 contact size 20 16 12 22d 20 16 20 16 20 dedicated to fiber optics insert arrangement 15-19 15-35 15-97 15-ac 17-2 17-6 service rating i m i m m i number of contacts 19 37 8 4 24 2 38 1 6 contact size 20 22d 20 16 22d 16 22d 8 twinax 12 insert arrangement 17-8 17-22 17-26 17-31 17-35 17-99 service rating ii coax i m m i number of contacts 8 2 2 26 4 11 4 55 21 2 contact size 16 12 coax 8 coax 20 22d 20 16 22d 20 16 contact legend 8 10 12 16 20 22d a b c d l m n p v u k j tr h g f e s 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 23 26 21 22 24 25
6 a b c d e f g h j k l a b c e k m n r s u v w g h f a b c d e f g h j k l m n p r s t u v w x y z a b c d e f g h j 1 2 3 4 9 10 16 17 24 25 33 34 42 43 50 51 57 58 63 64 66 a b c d e f g h j k l a b c d e f g h j k l m n p r s 1 11 21 31 41 51 61 71 79 a b c d e f g h j k l m n p r s t u v w x y z a b c d e f g h i j k m n p q r a b c d e f g h j k l m n p r s t u v w x y z a b c d e f g h i j k m n p q r s t a b c d a b c d e f a b c d e f g h j k l m p r s n t u v w x 1 2 3 4 5 6 7 8 15 16 24 25 34 35 45 46 55 56 66 67 76 77 85 86 93 94 95 96 97 98 99 100 f ront face of pin inserts illustrated amphe-lite series insert arrangements insert arrangement 19-11 19-31 19-32 19-35 21-11 service rating ii m i m i number of contacts 11 2 1 12 32 66 11 contact size 16 8 coax 12 22d 20 22d 12 insert arrangement 21-16 21-35 21-39 21-41 service rating ii m i i number of contacts 16 79 37 2 41 contact size 16 22d 20 16 20 insert arrangement 21-75 23-6 23-21 23-35 service rating m m ii m number of contacts 4 6 21 100 contact size 8 coax 8 twinax 16 22d contact legend 8 10 12 16 20 22d note: size 8 cavities can be supplied with either twinax or coax per customer requirement.
7 a b c d e f g h j k l m n p r s t u v w x y z a b c d e f g h k m n p q r s t a b u v w x y z a b c c d d e e ff g g hh 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 a b c d e f g h j k l m n p r s t u v w x y z a b c d e f g h k m n p q r t u v w x y z s jj kk l l aa bb c c d d e e ff g g hh 1 6 7 15 16 18 19 21 22 24 26 28 29 32 33 41 42 46 53 59 60 64 67 68 72 74 76 78 79 81 82 84 85 93 94 99 25 75 a b c d e f g h a b c d e f g h j k l ab c d e f g h j k l m n p r s t u v w x y z a b c d e f g h k m n p q r s t u v w ab c d e f g h j k l m np r s t uv a b c d e f g h j k l m n p r s t u v w x y z a b c d e f g h i j k m n p q r s t v w x y z aa bb c c u d d e e ff g g hh front face of pin inserts illustrated amphe-lite series insert arrangements insert arrangement 23-53 23-54 23-55 service rating i m i number of contacts 53 40 9 4 55 contact size 20 22d 16 12 20 insert arrangement 25-4 25-7 25-8 service rating i na na number of contacts 48 8 97 2 8 contact size 20 16 22d 8 twinax 8 twinax insert arrangement 25-11 25-17 25-19 service rating n m i number of contacts 2 9 36 6 19 contact size 20 10 power 22d 8 twinax 12 contact legend 8 10 12 16 20 22d
8 a b c d e f g h j k l m n p r s t u v w x y z 1 2 3 4 5 6 7 a b c d e f g h j k l m n p r s t u v w x y z a 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 a b c d e f g h j k l m n p r s t u v w x y z a b c d e f 1 4 7 8 14 15 24 25 35 36 47 48 58 59 70 71 81 82 93 94 104 105 114 115 121 125 128 a b c d e f g h j k l m n p r s t u v w x y z a b c d e f g h k m n p q r a b c d e f g h j k l m n p r s t u v w x y z a b c d e f g h k m n p q r s t u v w x a b c d e f g h j k l m n p r s t u v w x y z a b c d e f g h k m n p q r s t u v w x y z aa a b c d e f g h j k l m n p r s t u v w x y z a b c d e f g h i j k m n p q r s t u v w x y z bb cc d d e e f f gg hh jj kk l l mm nn aa pp front face of pin inserts illustrated amphe-lite series insert arrangements insert arrangement 25-20 25-24 25-26 service rating n i i number of contacts 10 13 3 4 12 12 16 5 4 contact size 20 16 8 twinax 12 coax 16 12 20 12 8 coax insert arrangement 25-29 25-35 25-37 service rating i m i number of contacts 29 128 37 contact size 16 22d 16 insert arrangement 25-43 25-46 25-61 service rating i i i number of contacts 23 20 40 4 2 61 contact size 20 16 20 16 8 coax? 20 ? coax contacts for rg180 or rg195 cable. contact legend 8 10 12 16 20 22d (locations u and y - dedicated to fiber optics)
9 amphe-lite series al00 wall mounting receptacle, composite all dimensions for reference only designates true position dimensioning millimeters shell size l max. m +.00 ?.13 r 1 r 2 s max t +.20 ?.13 v thread metric z max. aa max. ll .13 tt +.20 ?.13 9 13.06 19.69 18.26 15.09 24.1 3.25 m12x1-6g 5.03 5.94 23.19 5.49 11 13.06 19.69 20.62 18.26 26.5 3.25 m15x1-6g 5.03 5.94 23.19 4.93 13 13.06 19.69 23.01 20.62 28.9 3.25 m18x1-6g 5.03 5.94 23.19 4.93 15 13.06 19.69 24.61 23.01 31.3 3.25 m22x1-6g 5.03 5.94 23.19 4.39 17 13.06 19.69 26.97 24.61 33.7 3.25 m25x1-6g 5.03 5.94 23.19 4.93 19 13.06 19.69 29.36 26.97 36.9 3.25 m28x1-6g 5.03 5.94 23.19 4.93 21 13.84 18.92 31.75 29.36 40.1 3.25 m31x1-6g 5.79 5.18 23.14 4.93 23 13.84 18.92 34.93 31.75 43.3 3.91 m34x1-6g 5.79 5.18 23.14 6.15 25 13.84 18.92 38.10 34.93 46.4 3.91 m37x1-6g 5.79 5.18 23.14 6.15 al00f ( )* al00fd ( )* al00u ( )* al00ud ( )* inches shell size b thread class 2a 0.1p-0.3l-ts (plated) l max. m +.000 ?.005 r 1 r 2 s max. t +.008 ?.006 z max. aa max. panel thickness ll .005 tt +.008 ?.006 9 .6250 .514 .775 .719 .594 .948 .128 .198 .234 .913 .216 11 .7500 .514 .775 .812 .719 1.043 .128 .198 .234 .913 .194 13 .8750 .514 .775 .906 .812 1.137 .128 .198 .234 .913 .194 15 1.0000 .514 .775 .969 .906 1.232 .128 .198 .234 .913 .173 17 1.1875 .514 .775 1.062 .969 1.323 .128 .198 .234 .913 .194 19 1.2500 .514 .775 1.156 1.062 1.449 .128 .198 .234 .913 .194 21 1.3750 .545 .745 1.250 1.156 1.575 .128 .228 .204 .911 .194 23 1.5000 .545 .745 1.375 1.250 1.701 .154 .228 .204 .911 .242 25 1.6250 .545 .745 1.500 1.375 1.823 .154 .228 .204 .911 .242 * to complete order number, see page 22. m m .005 .13 t 4 places tt 4 places s 2 places 2 places 2 places r 1 r 2 v thread aa b thread ll m l 1.240 max 31.50 max ?a? z .909 max 23.09 max 1.084 max 27.53 max d view d for size 8 twinax only, relative to view d for size 8 coaxial only, relative to ?a? ?a?
10 .359 max 9.12 max 1.234 max 31.34 max 1.656 max 42.06 max 1.797 max 45.64 max view d for size 8 twinax only, relative to view d for size 8 coaxial only, relative to ?a? ?a? v thread .591 +.003 ?.000 15.01 +.08 ?.00 ?a? q b thread d * to complete order number see page 22. amphe-lite series al06 straight plug, composite millimeters shell size q max. v thread metric 921.8m12x1-6g 11 25.0 m15x1-6g 13 29.4 m18x1-6g 15 32.5 m22x1-6g 17 35.7 m25x1-6g 19 38.5 m28x1-6g 21 41.7 m31x1-6g 23 44.9 m34x1-6g 25 48.0 m37x1-6g all dimensions for reference only. inches shell size b thread 0.1p-0.3l-ts-2b (plated) q dia. max. 9 .6250 .858 11 .7500 .984 13 .8750 1.157 15 1.0000 1.279 17 1.1875 1.405 19 1.2500 1.515 21 1.3750 1.641 23 1.5000 1.767 25 1.6250 1.889 al06f ( )* al06fd ( )* al06u ( )* al06ud ( )*
11 * to complete order number see page 22. amphe-lite series al07 jam nut receptacle, composite al07f ( )* al07fd ( )* al07u ( )* al07ud ( )* all dimensions for reference only. d shaped panel cut-out dimensions to prevent connector from turning millimeters shell size a +.00 ?.25 c max. h hex +.43 ?.41 s .25 t +.25 ?.00 v thread metric 9 16.99 30.45 22.23 26.97 17.70 m12x1-6g 11 19.53 35.20 25.40 31.75 20.88 m15x1-6g 13 24.26 38.38 30.18 34.93 25.58 m18x1-6g 15 27.53 41.55 33.32 38.10 28.80 m22x1-6g 17 30.68 44.73 36.53 41.28 31.98 m25x1-6g 19 33.86 49.50 39.67 46.02 35.15 m28x1-6g 21 37.06 52.65 42.80 49.23 38.28 m31x1-6g 23 40.01 55.85 46.02 52.37 41.50 m34x1-6g 25 43.41 59.00 50.80 55.58 44.68 m37x1-6g inches shell size a +.000 ?.010 b thread class 2a 0.1p-0.3l-ts (plated) c max. h hex +.017 ?.016 s .010 t +.010 ?.000 9 .669 .6250 1.199 .875 1.062 .697 11 .769 .7500 1.386 1.062 1.250 .822 13 .955 .8750 1.511 1.250 1.375 1.007 15 1.084 1.0000 1.636 1.375 1.500 1.134 17 1.208 1.1875 1.761 1.438 1.625 1.259 19 1.333 1.2500 1.949 1.562 1.812 1.384 21 1.459 1.3750 2.073 1.688 1.938 1.507 23 1.575 1.5000 2.199 1.812 2.062 1.634 25 1.709 1.6250 2.323 2.000 2.188 1.759 t c h s 2 places panel thickness .062 min .125 max 1.57 min 3.18 max .378 max 9.60 max 1.280 max 32.51 max k ref shell sizes 9/11 ? .871 22.12 shell sizes 13/25 ? .878 22.30 .091 max 2.31 max b thread a d ?a? .794 max 20.17 max .940 max 23.88 max view d for size 8 twinax only, relative to view d for size 8 coaxial only, relative to ?a? ?a? v thread
12 b a .578 max 14.68 max b a b a *10-630912-( ) *10-630907-( ) 6.000 approx 152.10 approx *10-630908-( ) 3.500 approx 88.90 approx *10-630909-( ) .578 max 14.68 max .578 max 14.68 max with nylon braid with nylon braid and metal ring attached d * to complete order number, add shell size and suffix number. for example, shell size 11: 10-630912-011. amphe-lite ? accessories receptacle protection cap millimeters shell size b dia. max. d dia +.25 ?.00 9 22.23 17.86 11 25.40 21.44 13 28.58 25.81 15 31.75 28.98 17 36.53 32.16 19 38.10 35.33 21 41.28 38.51 23 44.45 41.68 25 47.63 44.86 inches shell size a thread class 2b 0.1p-0.3l-ts b dia. max. d dia. +.010 ?.000 9 .6250 .875 .703 11 .7500 1.000 .844 13 .8750 1.125 1.016 15 1.0000 1.250 1.141 17 1.1875 1.438 1.266 19 1.2500 1.500 1.391 21 1.3750 1.625 1.516 23 1.5000 1.750 1.641 25 1.6250 1.875 1.766 finish 10-no suffix black composite, unplated -( ) all dimensions for reference only.
13 * to complete order number, add shell size and suffix number. for example, shell size 11 with electroless nickel, 10-630910-11f amphe-lite ? accessories plug protection cap millimeters shell size d +.25 ?.00 n dia. max. 9 13.11 22.73 11 16.28 25.40 13 19.46 29.74 15 22.63 32.99 17 25.81 36.47 19 28.98 39.19 21 32.16 42.42 23 34.11 45.39 25 38.51 48.62 inches shell size a thread class 2a 0.1p-0.3l-ts d +.030 ?.000 n dia. max. 9 .6250 .516 .895 11 .7500 .641 1.000 13 .8750 .766 1.171 15 1.0000 .891 1.299 17 1.1875 1.016 1.436 19 1.2500 1.141 1.543 21 1.3750 1.266 1.670 23 1.5000 1.343 1.787 25 1.6250 1.516 1.914 finish 10-no suffix electroless nickel -( )f black composite, unplated -0( ) n b n b 1.166 max 29.62 max *10-630910-( ) *10-630911-( ) with nylon braid with nylon braid and metal ring attached d 1.166 max 29.62 max all dimensions for reference only.
14 * to complete order number, add shell size and suffix number. for example, shell size 11 with electroless nickel,10-630913-11f. amphe-lite ? accessories dummy receptacle finish 10-no suffix electroless nickel -( )f black composite, unplated -0( ) all dimensions for reference only. designates true position dimensioning millimeters shell size m +.51 ?.00 r 1 r 2 s .25 t +.20 ?.15 w .25 aa max. tt +.20 ?.15 9 20.88 18.26 15.09 23.83 3.25 2.49 5.94 5.49 11 20.88 20.62 18.26 26.19 3.25 2.49 5.94 4.93 13 20.88 23.01 20.62 28.58 3.25 2.49 5.94 4.93 15 20.88 24.61 23.01 30.96 3.25 2.49 5.94 4.39 17 20.88 26.97 24.61 33.32 3.25 2.49 5.94 4.93 19 20.88 29.36 26.97 36.53 3.25 2.49 5.94 4.93 21 20.09 31.75 29.36 39.67 3.25 3.18 5.18 4.93 23 20.09 34.93 31.75 42.88 3.91 3.18 5.18 6.15 25 20.09 38.10 34.93 46.02 3.91 3.18 5.18 6.15 inches shell size b thread class 2a 0.1p-0.3l-ts (plated) m +.020 ?.000 r 1 r 2 s .010 t +.008 ?.006 w .010 aa max. panel thickness tt +.008 ?.006 9 .6250 .822 .719 .594 .938 .128 .098 .234 .216 11 .7500 .822 .812 .719 1.031 .128 .098 .234 .194 13 .8750 .822 .906 .812 1.125 .128 .098 .234 .194 15 1.0000 .822 .969 .906 1.219 .128 .098 .234 .173 17 1.1875 .822 1.062 .969 1.312 .128 .098 .234 .194 19 1.2500 .822 1.156 1.062 1.438 .128 .098 .234 .194 21 1.3750 .791 1.250 1.156 1.562 .128 .125 .204 1.94 23 1.5000 .791 1.375 1.250 1.688 .154 .125 .204 .242 25 1.6250 .791 1.500 1.375 1.812 .154 .125 .204 .242 m m .005 .13 t 4 places tt 4 places s 2 places 2 places 2 places r 1 r 2 aa b thread m w *10-630913-( )
15 ff l kk v thread .270 +.010 ?.020 6.86 +.25 ?.51 .270 +.010 ?.020 6.86 +.25 ?.51 v thread kk ff ll u view at a f 1 f 2 f 1 f 2 straight style *10-630934-xxx 90 degree elbow style *10-630935-xxx * to complete order number, add shell size and suffix number. for example, shell size 11 with electroless nickel, 10-630934-11f. amphe-lite ? accessories cable clamps finish 10-no suffix electroless nickel -( )f all dimensions for reference only. millimeters shell size f 1 min. dia. cable f 2 max. dia. cable l max. u max. ff dia. max. kk dia. max. ll max. 9 2.39 5.16 36.35 16.66 8.81 15.98 25.78 11 3.58 6.35 36.35 17.48 10.01 19.20 26.97 13 4.37 8.20 36.35 19.05 11.86 22.43 28.58 15 5.16 10.72 36.35 21.82 14.38 25.68 33.73 17 5.94 12.70 36.35 23.80 16.36 28.91 35.36 19 6.73 14.27 36.35 25.40 17.93 32.13 36.91 21 7.54 15.88 37.90 26.97 19.53 35.38 40.87 23 8.33 17.86 37.90 28.98 21.51 37.80 42.06 25 9.12 19.43 37.90 30.56 23.09 41.05 43.66 inches shell size f 1 min. dia. cable f 2 max. dia. cable l max. u max. ff dia. max. kk dia. max. ll max. 9 .094 .203 1.431 .656 .347 .629 1.015 11 .141 .250 1.431 .688 .394 .756 1.062 13 .172 .323 1.431 .750 .467 .883 1.125 15 .203 .422 1.431 .859 .566 1.011 1.328 17 .234 .500 1.431 .937 .644 1.138 1.392 19 .265 .562 1.431 1.000 .706 1.265 1.453 21 .297 .625 1.492 1.062 .769 1.393 1.609 23 .328 .703 1.492 1.141 .847 1.488 1.656 25 .359 .765 1.492 1.203 .909 1.616 1.719
16 amphe-lite series contacts, sealing plugs, plastic dust caps above part numbers include standard 500 cycle finish designation - gold plating over suitable underplate in accordance with mil-c- 39029. for other contact options available for use in amphe-lite connectors, (thermocouple) consult sidney, ny. for protection caps see pages 12 and 13. standard contacts for amphe-lite series contact size pin part number socket part number 8 (coax) 21-33102-21 21-33101-21 8 (twinax) 21-33190-529 21-33191-530 10 (power) 10-597448-105 10-597449-105 12 10-597448-125 10-597449-125 16 10-597448-165 10-597449-165 20 10-597448-205 10-597449-205 22d 10-597448-725 10-597449-452 plastic dust caps shell size plug receptacle 9 10-70506-14 10-70500-10 11 10-70506-16 10-70500-12 13 10-70500-18 10-70500-14 15 10-70500-20 10-70500-16 17 10-70500-22 10-70500-19 19 10-70500-24 10-70500-20 21 10-70524-1 10-70500-22 23 10-70506-28 10-70500-24 25 10-70500-28 10-70524-1 sealing plugs contact size proprietary no. 8 (coax) 10-482099-8 8 (twinax) t3-4008-59p 10 (power) 10-576225 12 10-405996-121 16 10-405996-161 20 10-405996-201 22d 10-405996-221
17 items highlighted are most popular and most readily available. all dimensions for reference only. consult sidney, ny for specific contact contour stickout data. ns designates no stickout. sockets pcb socket contacts size tail dia contact stickout max/min (see illustration below) al00 al06 al07 10-497623-15 22d .019 .291 .226 .316 .251 .242 .182 10-497623-25 22d .019 .868 .803 .893 .828 .819 .759 10-497623-35 22d .019 .348 .283 .373 .308 .299 .239 10-497623-45 22d .019 .208 .143 .233 .168 .159 .099 10-497623-75 22d .019 .146 .081 .171 .106 .097 .037 10-497623-105 22d .019 .028 ns .053 .000 .021 ns 10-497623-145 22d .019 .609 .539 .634 .564 .560 .495 10-497623-155 22d .019 .423 .358 .448 .383 .374 .314 10-497643-15 20 .019 .348 .294 .373 .319 .299 .250 10-497643-25 20 .019 .213 .159 .238 .184 .164 .115 10-497643-35 20 .019 .555 .501 .580 .526 .506 .457 10-497643-45 20 .019 .138 .084 .163 .109 .089 .040 10-497650-15 16 .040 .255 .201 .280 .226 .206 .157 wire wrap contacts tail square 10-497577-15 22d .025 .155 .090 .180 .115 .106 .046 10-497577-25 22d .025 .002 ns .027 ns ns ns 10-497577-35 22d .025 .201 .136 .226 .161 .152 .092 10-497577-55 22d .025 .566 .501 .591 .526 .517 .457 10-497621-15 20 .025 .151 .101 .176 .126 .102 .057 10-497621-25 20 .025 .605 .555 .630 .580 .556 .511 10-497621-35 20 .025 .308 .258 .333 .283 .259 .214 see also catalog 12-170, amphenol cylindrical connectors for pcb applications. this catalog pro- vides the most commonly used insert pattern pin-out drawings which have been tooled for the purpose of attach- ing cylindrical connectors to printed cir- cuit boards. amphe-lite series contacts ? printed circuit board, wire wrap pcb socket and pin part numbers include finish designation - gold plating over suitable underplate in accordance with mil-c-39029. for other finish variations, consult sidney, ny. note: 22m and 22d contacts are interchangeable. for other contact options available for use in amphe-lite connectors (ther- mocouple, fiber optic), consult sidney, ny. pins pcb pin contacts size tail dia contact stickout max/min (see illustration below) al00 al06 al07 10-407552-15 22m .019 .335 .280 .360 .305 .286 .236 10-407552-55 22m .019 .224 .169 .249 .194 .175 .125 10-407552-85 22m .019 .060 .010 .085 .035 .011 ns 10-407552-95 22m .019 ns ns ns 10-407552-115 22m .019 .002 ns .023 ns ns 10-497640-15 20 .019 .348 .298 .373 .323 .299 .254 10-497640-25 20 .019 .213 .163 .238 .188 .164 .119 10-497640-45 20 .019 ns ns ns 10-497640-65 20 .019 .138 .088 .163 .113 .089 .044 10-497596-15 20 .025 .058 .012 .083 .037 .009 ns 10-497596-25 20 .025 .148 .102 .173 .127 .099 .058 10-497596-35 20 .025 .229 .183 .254 .208 .180 .139 10-497596-55 20 .025 .346 .300 .371 .325 .297 .256 10-497695-15 16 .040 .255 .205 .280 .230 .206 .161 10-497630-25 16 .062 .348 .298 .373 .323 .299 .254 10-497630-35 16 .062 .060 .010 .085 .035 .011 ns 10-497630-45 16 .062 .108 .062 .133 .087 .059 .018 10-597502-15 12 .081 .228 .178 .252 .203 .179 .134 wire wrap contacts tail square 10-407572-15 22d .025 .014 ns .498 .007 ns ns 10-407572-35 22d .025 .155 .105 .180 .130 .106 .061 10-407572-45 22d .025 .255 .205 .280 .230 .206 .161 10-407572-75 22d .025 .521 .475 .546 .500 .472 .431 10-407584-25 20 .025 .605 .559 .630 .584 .556 .515 10-407584-35 20 .025 .308 .262 .333 .287 .259 .218 contact stick out
18 .267 .003 shrink tube strength member .102 .001 dia ceramic ferrule .162 .004 a dia ref .06240 dia +.00002 ?.00002 alignment sleeve** 1.093 .020 .080 max cable dia .040 max buffer cable dia 1.500 max* 1.176 max* ceramic ferrule a dia ref .102 .001 dia .0625 +.0000 ?.0002 dia .297 +.003 ?.002 strength member shrink tube .040 max buffer cable dia .080 max cable dia amphenol ? multi-mode, size 16 termini features and performance levels: ceramic alignment ferrule which precisely positions the fiber within the termini phosphor bronze alignment sleeve, assembled on the socket after polishing insures accurate fiber to fiber alignment (a ceramic alignment sleeve is also available). typical insertion loss for 100/140 fiber with .2 na at 820 nm is .5 to .7 db using air gap (ag) polish technique use of the ceramic ferrule and sleeve maximizes the ability to hold extremely tight dimensional tolerances while maintaining accurate concentricity, thus providing superior and consistent optical loss performance. termination accomplished using the industry proven epoxy/ polish method. can be polished air gap (ag) or physical con- tact (pc). socket cleaning optional. consult amphenol, sidney, ny for termini cleaning tool. for application tools consult sidney, ny. multi-mode size 16 fiber optic termini amphe-lite series fiber optic termini ? multi-mode, size 16 size 16 multi-mode pin terminus size 16 multi-mode socket terminus * indicated dimension when fully assem- bled. amphenol ? multi-channel fiber optic connectors are supplied less contacts. order multi-mode termini by amphenol part number designation as shown in the chart below. consult amphe- nol, sidney, ny for further availability. ? additional sizes available upon request: consult amphenol, sidney, ny for availability. power contacts can be purchased separately, contact amphenol, sidney, ny. ordering information multi-mode termini (size 16) for amphe-lite connectors fiber size? core/cladding dia (microns) size 16 socket size 16 pin a dia ref inches microns 50/125 cf-198035-010 cf-198036-010 .0050 127 62.5/125 100/140 cf-198035-017 cf-198036-017 .0057 145 100/140/172 cf-198035-029 cf-198036-029 .0069 175 100/140/172 cf-198035-29a cf-198036-29a .0068 173.5 200/230 cf-198035-053 cf-198036-053 .0093 236 200/240 cf-198035-057 cf-198036-057 .0097 245 200/280 cf-198035-074 cf-198036-074 .0114 290 200/300 cf-198035-080 cf-198036-080 .0120 305 stainless steel body spring socket phosphor bronze alignment sleeve ceramic ferrule stainless steel body pin ceramic ferrule
19 .263 .004 .03937 +.00012 ?.00000 dia alignment sleeve** a dia ref ceramic ferrule .162 .002 1.500 max* .069 .001 dia 1.093 .020 strength member shrink tube .037 max buffer cable dia .063 max cable dia .123 min +.00012 .03937 ?.00000 dia .069 .001 dia a dia ref ceramic ferrule 1.176 max* shrink tube .037 max buffer cable dia .063 max cable dia strength member .297 +.003 ?.002 amphenol ? multi-mode, size 20 termini features and performance levels: designed for use in size 20 cavities of amphe-lite connectors designed with similar high performance components as the proven size 16 termini comparable performance and reliability to the size 16 termini can be expected offers increased termini density in amphenol amphe-lite con- nectors maintains fiber optic/electrical hybrid capabilities allows for multiple fiber accommodations termination accomplished using the industry proven epoxy/ polish method. can be polished air gap (ag) or physical con- tact (pc). socket cleaning optional. consult amphenol, sidney, ny for termini cleaning tool. for application tools consult sidney, ny. amphe-lite series fiber optic termini ? multi-mode, size 20 amphenol ? multi-channel fiber optic connectors are supplied less contacts. order multi-mode termini by amphenol part number designation as shown in the chart below. consult amphenol, sidney, ny for further availability. ? additional sizes available upon request: consult sidney, ny for availability. power contacts can be purchased separately, contact sidney, ny. ordering information multi-mode termini (size 20) for amphe-lite connectors fiber size? core/cladding dia (microns) size 20 socket size 20 pin a dia ref inches microns 50/125 cf-198080-010 cf-198081-010 0.0050 127 62.5/125 100/140 cf-198080-017 cf-198081-017 0.0057 145 multi-mode size 20 fiber optic termini * indicated dimension when fully assem- bled. size 20 multi-mode pin terminus size 20 multi-mode socket terminus ceramic ferrule phosphor bronze alignment sleeve spring stainless steel body socket pin ceramic ferrule stainless steel body
20 dia. .297 +.003 ?.002 .102 .001 a dia. ref. ceramic ferrule c ref shrink tube .500 radius b max .128 +.002 ?.001 dia. .0625 +.0000 ?.0002 .675 max. 1.093 .020 .500 radius ref. .557 .008 .537 ref. 1.145 max. .128 dia. +.002 ?.001 .102 .001 dia. shrink tubing*** 1.100 ref. 1.820 max.** a dia. ref. .06240 .00002 .162 .004 ceramic ferrule alignment sleeve*** .267 +.003 ?.002 amphenol provides 90, size 16 fiber opt ic termini that can be used with multi-channel cylindrical connectors. 90 socket termini (size 16) 90 pin termini (size 16) ordering information for 90 multi-mode socket termini fiber size? core/cladding dia (microns) socket, size 16 amphenol part number for use in cylindrical connectors a dia ref inches microns 50/125 cf-198111-010 .0050 127 62.5/125 100/140 cf-198111-017 .0057 145 100/140/172 cf-198111-29 or .0069 175 cf-198111-29a .0068 173.5 ? additional sizes available upon request: consult amphenol, sidney, ny for availability. * consult amphenol, sidney, ny for ordering information. ** indicated dimension when fully assembled. *** shrink tubing and alignment sleeve are shipped unassembled. ? additional sizes available upon request: consult amphenol, sidney, ny for availability. * consult amphenol, sidney, ny for ordering information. ordering information for 90 multi-mode pin termini fiber size? core/cladding dia (microns) pin, size 16 amphenol part number for use in cylindrical connectors a dia ref b max (inches) c ref (inches) inches microns 50/125 cf-198110-010 .0050 127 1.121 1.100 62.5/125 100/140 cf-198110-017 .0057 145 1.121 1.100 100/140/172 cf-198110-029 or .0069 175 1.121 1.100 cf-198110-29a .0068 173.5 1.121 1.100 50/125 cf-198112-010 .0050 127 1.003 .900 62.5/125 100/140 cf-198112-017 .0057 145 1.003 .900 100/140/172 cf-198112-029 or .0069 175 1.003 .900 cf-198112-29a .0068 173.5 1.003 .900 amphe-lite series fiber optic termini ? 90 multi-mode, size 16
21 amphe-lite series application tools contact size/type crimping tool turret die or positioner 12 pin and socket m22520/1-01 m22520/1-04 16 pin and socket m22520/1-01 m22520/7-01 m22520/1-04 m22520/7-04 20 pin and socket m22520/1-01 m22520/2-01 m22520/7-01 m22520/1-04 m22520/2-10 m22520/7-08 22d pin m22520/2-01 m22520/7-01 m22520/2-09 m22520/7-07 22d socket m22520/2-01 m22520/7-01 m22520/2-07 m22520/7-05 8 twinax center pin and socket m22520/2-01 m22520/2-37 8 twinax intermediate outer pin & socket m22520/5-01 m22520/5-200 the following data includes information pertaining to the application tools which have been estab- lished for crimping, inserting, and removing contacts incorporated in the amphe-lite series con- nectors. for additional information on coaxial contact tools see catalog 12-130. all crimping tools included are the ?full cycling? type. there is a possibility of additional crimping tools other than those included being available at present or in the future for this specific application. recommended crimping tools contact size/type crimping tool turret die or positioner 8 coaxial inner pin and socket m22520/2-01 m22520/2-31 8 coaxial outer pin and socket m22520/5-01 m22520/5-05 die closure b m22520/5-01 m22520/5-41 die closure b m22520/10-01 m22520/10-07 die closure b 16 coaxial inner pin and socket m22520/2-01 m22520/2-35 16 coaxial outer pin and socket m22520/4-01 m22520/4-02 12 coaxial inner pin and socket m22520/2-01 m22520/2-34 12 coaxial outer pin and socket m22520/31-01 m22520/31-02 10 (power) tp201423 1716p-1 where 2 or 3 tools are listed for a contact size, only one tool and its die or positioner are required to crimp the contact. the above crimping tools and positioners are available from the approved tool manufacturer. insertion tools use with contact size plastic tools metal tools ms part number color angle type straight type proprietary part number color ms part number proprietary part number 10 (power) m81969/14-05* gray / (white) m81969/8-11 ? ? green 12 m81969/14-04* yellow / (white) m81969/8-09 11-8674-12 11-8794-12 yellow 16 m81969/14-03* blue / (white) m81969/8-07 11-8674-16 11-8794-16 blue 20 m81969/14-10* red / (orange) m81969/8-05 11-8674-20 11-8794-20 red 22d m81969/14-01* green / (white) m81969/8-01 11-8674-24 11-8794-24 black 8 coaxial none required 8 twinax none m81969/46-06** none red removal tools use with contact size plastic tools metal tools ms part number color for unwired contacts proprietary part number angle type straight type proprietary part number color ms part number proprietary part number 10 (power) m81969/14-05* (gray) / white ? m81969/8-12 ? ? green / white 12 m81969/14-04* (yellow) / white 11-10050-11 m81969/8-10 11-8675-12 11-8795-12 yellow / white 16 m81969/14-03* (blue) / white 11-10050-10 m81969/8-08 11-8675-16 11-8795-16 blue / white 20 m81969/14-10* (orange)/ red 11-10050-9 m81969/8-06 11-8675-20 11-8795-20 red / white 22d m81969/14-01* (green) / white 11-10050-7 m81969/8-02 11-8675-24 11-8795-24 green / white 8 coaxial m81969/14-12 green none none 11-9170 drk264-8?? n/a 8 twinax m81969/14-12 green none m81969/46-12** 11-9170 n/a n/a the m81969/8, 11-8674, 11-8675,and 11-8794 metal contact insertion and removal tools will accommodate wires having the maximum outside diameter as fol- lows: contact size 12?.155, 16?.109, 20?.077, 22d?.050. when wire diameters exceed those specified, the plastic tools must be used . * double end insertion/removal tool. ** twinax insertion tools are available only in a straight type, metal version. ? to be determined. ?? contact daniels manufacturing co. for availability.
22 amphenol ? amphe-lite composite connectors can be ordered by coded part number. ordering procedure is illustrated by part number al00f9-35pb as shown below: al 00 f 9 - 35 p b ( ) connector type shell style service class shell size insert arrangement contact type alternate positions specials amphe-lite series how to order connector type al . . . designates amphe-lite connector series shell style 00 . . . designates wall mount receptacle 06 . . . designates straight plug 07 . . . designates jam nut receptacle service class f . . . . electroless nickel plated composite shells, with fluorinated silicone rubber components for increased fluid resistance fd . . . electroless nickel plating composite shells, with dimethyl silicone rubber components u . . . . black composite, unplated, with fluorinated s ilic one rubber components for increased fluid resistance ud . . . black composite, unplated, with dimethyl silicone rubber components shell size 9 thru 25 available insert arrangement see insert arrangement chart, page 3. see insert configurations illustrated on pages 5-8. contact type p . . . . designates standard 500 cycle pin contacts s . . . . designates standard 500 cycle socket contacts c . . . . designates pin pc tail contacts loaded in connector (see page 17). d . . . . designates socket pc tail contacts loaded in connector (see page 17). alternate positions locksmith keying - rotation of minor keys. ?n? not required for normal position, see page 4. specials nmg . designates non-magnetic connectors. see page 24 for description of the new non-magnetic product offering of 100% non-magnetic style amphe-lite connectors. other specials include optional contact styles and contact platings. also includes a high decou- pling style of amphe-lite. consult amphenol, sidney, ny for part numbering suffix for specials. standard packaging the amphe-lite series is shipped with connectors and contacts packaged in bulk. consult amphenol indus- trial, sidney ny for special packaging requirements rohs compliant product available - consult amphenol industrial operations. r o h s a m p h e n o l e u / 2 0 0 2 / 9 5 / e c
23 amphe-lite ? capabilities fiber optics, coax contacts, flex termination, pc tails fiber optic fiber optic termini connectors offer a precision optic interconnect system within the amphe-lite connector. the amphe-lite connector provides protection from damage in severe environmental and physical conditions. optical performance is optimized utilizing the ceramic alignment features employed by the termini. insertion losses are typically .8db and can range from .5 to 1.5 db, depending on test conditions. see pages 18-20 for fiber optic termini features and how to order. ask for publication 12-352 or contact sidney, ny for more information on amphenol fiber optic con- nectors. also available with mt and lc termination within an amphe-lite shell kit. contact amphenol, sidney for more information. connectors with coax contacts for shielded wire applications, coaxial contacts can be incorporated into amphe-lite connectors. designed-in crimp or solder types are available to fit various rg and special cables. high performance coaxial contacts eliminate discontinuities or impedance variations due to movement of parts under axial load. for further information on coax contacts ask for catalog 12-130 filter connectors for emi protection emi shielding protection can be integrated into the amphe-lite connector with a pla- nar array filter device. this provides a cost effective alternative to discrete devices mounted inside the box, and provides the weight and space savings necessary for modern electronic systems. amphenol?s industrial connectors with filter protection are called the amphe-db series; a family of popular industrial cylindricals that are enhanced to provide emi protection. the amphe-db series family includes the amphe-lite filter with a planar filter device and also mil-5015 and mil-c-26482 connectors which incorporate chip capacitor board filter devices. flex termination assemblies for printed circuit board applications amphenol provides flex termination assemblies for printed circuit board attachment. flex circuits are available for amphe-lite connectors in flat or sculptured styles. sculptured ? flexible circuits with built-in terminations eliminate the failures associ- ated with crimped or solder-on contacts, and they are designed to geometrically fit the tight space requirements within a unit. they plug into a printed circuit board and create a self-locking terminal pad which eliminates the need for an additional inter- connect to the pcb. consult amphenol industrial operations for information on amphe-lite connectors with flex circuits. pc tail contacts in amphe-lite connectors another amphe-lite option allowing for greater flexibility, is the jam nut with the stand-off adapter. this combination provides a means to fasten a pcb or rigid flex to the rear of a jam nut shell. shell style designator is a 0p. an example part number is al0pf17-35p. consult amphe- nol industrial operations for further information. fiber optics and coax contacts amphe-db - amphe-lite connector with planar array filter flex termination assemblies amphe-lite jam nut connector with stand-off adapter and pc tails see catalogs online at www.amphenol-industrial.com
24 non-magnetic amphe-lite connectors a new product offering from amphenol is the non-magnetic amphe-lite style which is made of a durable corrosion resistant composite material for harsh envi- ronments.the same triple start thread used on standard amphe-lite connectors allows for complete mating in a single turn of the coupling nut. ip67 sealing grom- mets and interfacial seals are standard. it is an ideal solution for mri equipment in the medical market, and in other test equipment where a 100% non-magnetic multi-conductor connector is required. with up to 128 size 22d contacts in one connector, the amphenol non-magnetic amphe-lite is one of the few 100% non-magnetic connectors available today. it is available in a straight plug and three receptacle shell styles: wall mount, in-line and jam nut. non-magnetic styles are available with many of the standard amphe- lite inserts. a wide variety of contact styles can be incorporated, and it can also be assembled with amphenol act flex circuits. ground plane connectors amphenol offers amphe-lite connectors for data bus, lan and coax/triax/twinax transmission lines with conductive inserts that ground the outer conductor of the coax, triax or twinax contact to the shell. these connectors are sold ?less contacts?. they will accommodate size 8 coax, triax or twinax contacts or size 12 and 16 coax contacts. the insert availability chart on page 3 indicates the patterns that are available in a ground plane version, (see those designated with a star symbol), and consult amphenol, sidney ny for ordering procedures. connectors with concentric twinax contacts the size 8 concentric twinax contact was developed for use in mil- std-1553 airborne multiplex data bus applications which require high performance interconnect characteristics in multi-pin connec- tors. the amphe-lite series with concentric twinax contacts are ideal for communication data bus applications. the concentric twinax con- tact is crimp terminable to twisted-shielded cable. for further information on concentric twinax contacts ask for amphe- nol catalog 12-130. connectors with reduced component twinax (rct) contacts the rct (reduced component twinax) contact meets mil-c- 39029/90 and /91 requirements for intermateability and performance while reducing the number of user-assembled components from seven to three. the inner conductors and outer barrel of the rct are each terminated to the cable by a crimp joint, so no costly assembly soldering operations are required. features include: three user assembled components available in size 8 and size 10 contacts mil-c-17/176-00002 cable termination for installation in amphe-lite connectors termination completed in only two crimping operations inner conductors stripped to common length, eliminating multiple measurements for further information on rct contacts ask for amphenol catalog 12-130. amphe-lite series ? capabilities non-magnetic connectors, ground plane connectors, twinax contacts, power contacts non-magnetic amphe-lite connector with power contacts, fiber optics and flex circuitry ground plane connector with metallic insert and concentric twinax contacts concentric twinax contacts qualified to m39029/90 and /91 rct (reduced component twinax) contact cable crimp intermediate outer pin ferrule & inner assembly assembly connectors with power contacts size 10 power, size 12 and size 16 contacts are available in many standard insert arrangements. these contacts provide a wide range of power transmissio n capabilities. standard con- tacts are gold plated to maintain a superior conductive surface. for further information on insert patterns that contain power contacts refer to the insert availability chart on page 3. see catalogs online at www.amphenol-industrial.com

▲Up To Search▲

Price & Availability of AL07X11-35S

	To Download AL07X11-35S Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .